2019 Land Pride RC4610

Call for Price

No Image Available
Land Pride



The RC4610 Folding Offset Cutter is the single-wing version of our RC4615. It combines Land Pride's proven deck design of the RC40 Series with the rugged gearboxes and dependable axles and drivelines from our RC56 Series. For contractors that want the lighter tongue weight of a single deck cutter, the RC4610 will provide the durability they need. Made for tractors in the 50-250 HP range, the RC4610 features 3.5" cutting capacity, Cat. 6 main driveline, Cat. 4, or optional Cat. 5, wing drivelines, fully welded 10 gauge decks, and beveled, replaceable skid shoes to prevent gouging.

  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearbox: Driveline grease zerks are easier to access.
  • LED signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
  • LP Performance Hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor drawbar: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
  • Input driveline: Cat. 6 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches: Cat. 5 intermediate or Cat. 4 Wing Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline: cross journals: Intermediate and wing driveline cross journals are easier to grease.
  • High Blade tip speed: Allows clean cutting of material.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Good cutting capacity: Can cut brushy areas with saplings up to 3 1/2".
  • 12" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • Smooth Top Design: Allows for easy cleaning of deck.
  • Deck sheet tops are 100% welded: Makes center deck and wing deck stronger.
  • 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
  • Beveled skid shoe on wing: Reduces gouging the ground when turning.
  • Hinged wing section: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Transport lock will hold the wing in the folded position in the event of hydraulic loss.
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs on trailing arms: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheel(s) mounted on folded-up wing.Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on cutter and tractor drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing entire axle assembly.
  • 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Wheel options: Laminated tires: Eliminates flats; Air filled tires: Give better cushion while transporting, Foam-filled tires: Give better cushion while transporting and can’t go flat.
  • LP Performance Hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Deck ring option: Keeps blades from damaging the deck.
  • Tractor horsepower: 50 - 200 hp
  • Gearbox horsepower: 540 rpm or 1000 rpm, 250 hp divider, 210 hp center & wing
  • Gearbox lubrication: Gear Lube 80-90W EP
  • Gearbox oil capacity: Splitter: 5.5 pints; Center deck & Wing: 10 pints
  • Cutting capacity: 3 1/2"
  • Total machine weight: 4868 lbs. Includes 5 Laminated tires, single chains, deck rings, and LP Performance Hitch.
  • Tongue weight: 1920 lbs.
  • Blade tip speed: Center Blades = 16,300 FPM & Wing Blades = 16,300 FPM
  • Hitch types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch jack: Standard (7,000 lbs.)
  • Cutting width: 10'-0"
  • Overall width: 11'-7 3/4"
  • Minimum transport width: 7'-7 3/4"
  • Overall length: 16'-6" (Shorter if deck is raised fully up)
  • Deck height: 12"
  • Cutting height: 2" - 14"
  • Lift hydraulics 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Flex: 45o up, 20o down while cutting.
  • Wing hydraulics: 3" x 12" hydraulic cylinder, hoses & fittings
  • Wing transport protection: Wing transport lock
  • Deck material: 10 gauge
  • Side skirt material: 1/4" plate
  • Wing deck Skid shoes: 1 Replaceable shoe
  • Center deck Skid shoes: 2 Replaceable shoes
  • Signal lights: 7 Pin connector, SAE J560 pin configuration; LED (light-emitting diode)
  • Blades - 4 (2 per carrier): 1/2" x 5" Heat Treated Free Swinging Alloy Steel with Uplift
  • Blade overlap: 6"
  • Blade bolt: Keyed with hardened flat washer & locknut
  • Stump jumper / Blade holder: 3/16" Thick round dish shaped pan, reinforced with 1" x 5" blade bar
  • Deck ring: Optional 3/8" x 4 1/2"
  • Front & rear guards: Optional single row chain or dual row chain
  • Intermediate driveline Standard - Category 5 with Slip-Clutch
  • Wing driveline Standard: - Category 4 with Slip-Clutch or optional Category 5 with Slip-Clutch
  • Wheel options: 6" x 21" Laminated tires; 25.5" new tire with or without foam fill; 29" x 16 ply used aircraft tires without foam filling
  • Number of wheels: 5 - Wheel option: 4 on transport axle and one on wing axl; 6- Wheel option: 4 on transport axle and two on wing axle
  • Transport axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4"



Working Width
10 ft. 0 in.
11 ft. 7 3/4 in.
16 ft. 6 in.
4868 lb.
Recommended HP
50 - 200 hp

Related Products