| Catalog |
|
|
| |
| Manufacturers |

- select manufacturer -
John Deere
Kubota
Stihl
Bluebird
Yamaha
Rears Mfg Co
W Perfect
Bobcat (Rentals Only)
BlueLine
Agri-Fab
Goldoni
Turbo-Mist
Massey Ferguson
NONE
|
| |
| Quick Find |
Use keywords to find the product you are looking for.
Advanced Search |
| |
| Contact Information |
Toll-Free: (800) 461-5539 Phone: (509) 886-1566
Fax: (509) 884-5464
Address:
Mail:
PO Box 75
Wenatchee, WA 98807
Physical:
4857 Contractors Drive
E. Wenatchee, WA 98802
More Contact Information
Questions / Feedback Form |
|
 |
Seeding and Sodding Home Lawns
Sod can be planted year-round as long as the ground is not frozen. Freezing temperatures
or snow will not damage the sod. Sod planted in the cool months takes less water
and roots faster. During the cool months, roots are active in their develoment while
top growth is slow in developing. Sometimes during the first winter, the new lawn
will actually stay green throughout the winter. During the warm months, root activity
slows while top growth is most active.
Introduction
"Should I seed or sod?" Both have advantages and disadvantages. There
are three important decisions when considering establishment methods:
- turfgrass selection
- site preparation
- care of the new lawn
These considerations will be discussed for each establishment method.
The Pros and Cons
The most important difference between seeding and sodding is the time necessary
for developing a mature or durable turf. Sodding is essentially transplanting a
mature turf that has been cared for by a professional. Seeding involves the same
process used in the establishment of sod and can be accomplished by a professional
or the homeowner. The number of variables involved in seeding make it difficult
and many times unsuccessful for the homeowner. The following outline lists some
of the advantages and disadvantages of each establishment method.
| Seeding |
| Advantages |
|
Disadvantages |
- More grass types and varieties to choose from
- Less expensive than sodding
- Stronger root system development initially
|
|
- Initial establishment is longer
- For best results, time of seeding is limited mainly to late summer and early fall
- Moisture is critical for the young seedlings
|
| Sodding |
| Advantages |
|
Disadvantages |
- Rapid establishment and relatively weed-free in the beginning
- Good for slopes or areas prone to erosion
- Can be laid any time during the growing season
|
|
- Expensive
- Less selection or control over kinds of grasses, especially shade tolerance
|
Seed Establishment
Kentucky bluegrass, fine fescue, and some of the perennial ryegrass cultivars are
recommended. Grasses that are sold in the state, but not recommended, will be discussed
later. Before a seed mix is chosen, evaluate the location: Is there shade, excessive
use or wear, etc.? Is the lawn desired to be a showcase and green throughout the
season (high maintenance), or is a healthy turf desired with a minimum of fuss (low
maintenance)? These are important questions to consider when choosing grasses.
- For shady locations, look for seed mixtures specifying shade tolerance. These will
contain fine fescues along with some common and shade-tolerant Kentucky bluegrasses.
- For sunny areas that receive a lot of wear, mixtures of improved Kentucky bluegrasses
and perennial ryegrasses are best.
- For low maintenance turf, mixtures of Kentucky bluegrasses and fine fescues will
offer a durable lawn.
The availability of specific varieties will vary from year to year. Most varieties
will perform equally well. Your local seed distributor, garden center, or county
extension educator can help you evaluate the best varieties for your lawn. Some
varieties may be special ordered as seed, but at a higher cost.
Grasses to Avoid
Zoysia:
Well adapted to the southern U.S., but not the north. Establishes slowly and is
green only between the last spring frost to the first frost of fall.
Annual Ryegrass (Italian Rye):
Usually found in cheap seed mixtures. Useful as a temporary green cover or nursecrop,
but will not come back the following year. Different from perennial ryegrass.
Bentgrass:
Major use is in golf course turf under low mowing heights ( 1/8"
to ½" ). At lawn mowing height (23"), bentgrasses tend to be
very puffy, not uniform, poorly colored, and disease prone.
Tall fescue:
Older varieties have not performed well in the north due to their coarse texture
and limited hardiness. Newer varieties, however, are being developed and may be
recommended in the future.
Sod Establishment
When sodding a lawn, the consumer is limited
in the varieties available. Occasionally, some perennial ryegrass or fine fescue
is available in the mixture. A retailer or installer should know what varieties
are in their sod; if not, they can get this information from the sod grower.
Soil Preparation: Seed and Sod
Whether seeding or sodding an area,
preparation of the soil is critical, yet often neglected in establishment. Good
site preparation will simplify maintenance for years to come and ensure healthier
turf. Soil preparation should be the same for seeding or sodding. Before you begin,
take a soil test to find out the characteristics of the soil you are working with.
Consult the nearest county extension office for sampling materials and procedures.
The best type of soil for growing turf is a sandy loam. This soil is mostly sand
with some silt and clay. Other soils may need amendments and more care, but will
support a good lawn. Amending heavy clay soil with organic matter such as peat (23
cubic yards per 1,000 ft2 ) will open up a soil, allowing better air
and water movement. The addition of "black dirt" should be evaluated since
it often consists of mainly silt and clay soils, and compacts easily. If a large
amount of fill is needed, such as to raise up an area, good quality topsoil can
be used as long it is less than 20% clay and free of residual herbicides. Any topsoil
or soil ingredient should be incorporated into the native soil carefully. Once amendments
have been tilled in, fine grade the area with the addition of phosphorus and potassium
fertilizer, as prescribed by the soil test. Additional nitrogen can be added after
the lawn is mowed the first time. A roller or cultipacker (a segmented roller that
also breaks up soil lumps) can be used to firm the soil slightly. The site is now
ready for seed or sod.
Seeding
The best time to seed in the northwest is late summer (mid-August
to mid-September) due to favorable conditions for germination and growth. In addition,
fewer weed seeds are germinating that might compete with the grass seedlings. Lastly,
there is ample time for the plants to be well established before winter. Seeding
can be done in the spring; however, weeds and high summer temperatures often reduce
the chance of success. Most annual weeds that compete with new grass seedlings germinate
in spring. A selective herbicide (such as) Siduron, may be used on newly seeded
lawns, reducing these weed problems to some extent. In addition, the short growth
period in spring allows little time to develop a root system to survive the summer
heat stresses. Seed should be spread in two steps, each at a half rate, in perpendicular
directions across the site. This technique ensures the most uniform coverage. Follow
up with a light raking allowing about 1015% of the seed to show. Use a roller
or cultipacker over the area to ensure good seed-soil contact. Watering the new
site is very important. For the best germination, be sure that there is moist soil
to a depth of 46 inches. After seeding, water only as needed. Some drying
during the day will not harm the seeds, and may actually enhance germination. Cease
watering when free water (puddles) begin to appear. When the seed has germinated,
begin regular watering while the seedlings are very small. Gradually taper off the
watering as the plants grow larger and the temperature (in fall) cools off. Ordinarily,
612 weeks are needed for establishment. It takes nearly a full season for
the new lawn to be a mature and durable turf able to withstand considerable traffic.
Sodding
Purchase sod as fresh as possible. Ideally, it should have
been cut no more than 24 hours prior to delivery. The sod should be laid as soon
as possible, or within one day after delivery. If the sod needs to be stored for
a time, it should be kept in a cool, shaded area to avoid drying out of exposed
rolls. Lay the sod on slightly moistened soil, staggering the joints much like brick
laying. When laying sod on a slope, lay the rolls across the slope and stake each
piece to hold it in place. Fill any cracks with soil to prevent edges from drying.
Use a roller about one third full of water to smooth the site and ensure the roots
of the sod have good contact with the soil. Keep the sod moist but not saturated
until it is firmly rooted in the soil (a few days), then gradually reduce watering.
In two to three months it can be treated as an established lawn. Aerification may
help to prevent layering caused by peat or soil that came with the sod. Aerify after
establishment in spring or fall, to at least a depth that goes through the sod and
penetrates the existing soil layer. Once the lawn is established, it will provide
its many benefits such as cooling effects, erosion, runoff control, and allergen
reductions.
‹ Back to Helpful Hints
|